In general, installing the mesh is a meticulous process.

Before the installation, ready-to-install architectural wire mesh elements are delivered with pre-installed tension profiles.

First, the clevis bolts are attached to the flat tension profile, with the exception of two clevis bolts where the lifting tools will be used. Then, self-locking nuts secure the clevis bolts to the flat tension profile.

Next, the mesh roll is placed in the cradle and lifting tools are installed on the tension profile. The elements are lifted with the crane and unroll inside the cradle, with the help of two people guiding the elements. The panel is attached at the top by inserting the clevis bolts through the top substructure profile. The installation of the bottom of the mesh element is executed in the same manner.

Next, the wire mesh elements are pre-tensioned by compressing the pressure springs to the given value. To secure the intermediate connections, the wire connectors are installed around the tubes and fastened to the back side of the element.